| Our Products |
| |
PELLETISER |
|
| For
Perfect Pellets, High Production & Low Costs |
PM
Strand pelletisers are designed and engineered for high
performance. They are the first choice of resin
producers throughout the plastic industry. They assure
(a) low maintenance, (b) long service and (c) quiet,
precise cutting. They come in a versatile range of
machines, manufactured to match the requirements of
customers for cutting uniform sized pellets out of the
strands from plastic extruder machines. PM pelletisers
will also cut fibers, thermoplastics as well as rubber.
There is also a special model for glass and
mineral-filled resins. |
|
 |
|
| For
Unique Design & Optimal Operation |
The
innovative design of PM pelletisers has many unique and
useful features. The larger diameter of the upper feed
roll and its close proximity to the rotor eliminates the
need of the stripper bar used in conventional machines.
The alignment of the feed plane and the twin rollers
prevents bunching up of plastic strands and deformation
of the upper feed roll. By the positioning of the feed
table and the bed knife lower than the centre line of
the rotor, the strands remain flat while being
drawn to the rotor's cutting edges, ensuring a clean
cut.
Our
helix-angled rotor is a specially designed component
which contributes most to the cutting edge comes down,
it progressively shears a single row of pellets from the
incoming strands. Just as it finishes its cut, the next
cutting edge starts shearing the next strand. This
ensures that each strand produces a pellet exactly the
same size as previous ones. The cleaner cut made by
these helix-angled edges produces minimal percentages of
"overs" and fines, also with less torque and much less
noise. |
| |
| For
Quality & Safety |
The
cutting chamber design is uncluttered and affords easy
access. A safety interlock is provided so that the
pelletiser cannot run when the cover to the cutting
chamber is raised. In short, PM palletisers ensure
safety, high production capacity at lower RPM, low noise
levels and above all, quality output. All these features
are crucial for success in the highly competitive and
increasingly quality-oriented environment of our
plastics conversion industry. |
| |
PELLETISER |
| |
Model |
PEL
1. |
PEL
2. |
PEL
3. |
PEL
4. |
PEL
5. |
PEL
6. |
PEL
7. |
Rotor Dia. |
76mm |
150mm |
180mm |
200mm |
305mm |
305mm |
305mm |
Rotor Length. |
50mm |
100mm |
150mm |
250mm |
405mm |
500mm |
800mm |
No. of teeth. |
10 |
16 |
18 |
24 |
48 |
48 |
48 |
Bottom Guide Roller
Dia. |
46mm |
50mm |
75mm |
50mm |
75mm |
75mm |
80mm |
Upper Guide Roller Dia. |
50mm |
60mm |
75mm |
90mm |
140mm |
140mm |
80mm |
No. of Strands of 3
mm Dia. |
6 |
15 |
21 |
30 |
60 |
110 |
185 |
Production
kg-/hr. |
10 |
80 |
200-300 |
600 |
1350 |
2000 |
3000-4000 |
H.P. |
1 |
2 |
5 |
15 |
20 |
40 |
60-80 |
Drive Controls |
D.O.L. Starter |
D.C. |
D.C. |
D.C. |
D.C. |
D.C. |
DC/AC |
Feed Tray height |
Table mounted |
1000mm |
1000mm |
1200mm |
1200mm |
1200mm |
1200mm |
Total Dimensions. |
700Í300Í
300 |
750Í500Í
1200 |
900Í600Í
1250 |
1000Í800Í
1400 |
1000Í900Í
1500 |
1000Í1000Í
1500 |
1000Í1200Í
1500 |
LÍBÍH
in mm. |
|
|
|
|
|
|
|
|
| |
| |
|
TECHNICAL QUESTIONNAIRE FOR
PELLETISER |
| |
|
Please answer the following
questions as detailed and
precisely as possible to
facilitate and speed up our
suggestions for the MOST
ECONOMICAL solution to your
problem. The information given
will be treated as confidential. |
| |
|
|
| |
|
Download PDF
 |
|
|
` Back
Page
top |
Next Page a |
